Smoke · Heat · Carbon monoxide

Interconnected Smoke Alarms
One Goes Off, They All Do

Ajax smoke, heat and carbon monoxide alarms that sound together in every room and alert your phone wherever you are. Add them to your Ajax alarm, or start fresh.

Ajax Certified Installer
Registered electricians
10-year sealed batteries
Every alarm tested together
Fixed quote before work starts
Why interconnected

A fire alarm you can actually hear

A standalone alarm only warns the room it is in. Ajax FireProtect 2 alarms work as one system.

Every alarm at once

Smoke in the garage sets off the alarm in every bedroom. Nobody sleeps through a fire at the other end of the house.

On your phone, anywhere

The Ajax app alerts you the moment an alarm goes off, so you know about a fire at home when nobody is there.

Tells you which room

The alert names the alarm that went off, so you know straight away whether it is burnt toast or the garage.

10-year sealed battery

No low-battery chirp at 3am and no batteries to change. The app tells you when an alarm needs attention.

Fewer false alarms

A dual-spectrum optical smoke sensor and a dustproof, insect-proof chamber screen out a lot of what sets off cheap alarms.

Still works if the hub is down

Each alarm has its own 85 dB siren, and the alarms set each other off directly if the hub or the internet is down.

Ajax FireProtect 2 smoke and heat alarm on a ceiling, with smoke around it
Already have Ajax?

Add fire protection to your alarm

If you already have an Ajax alarm, most of the work is done. The hub on the wall talks to fire alarms as well as intruder sensors, so we fit the detectors, pair them and they appear in the same app on your phone. No new panel, no new app.

Fire alarms stay on whether the alarm is armed or not, day and night. If your alarm is monitored by Alarm Watch, a fire alarm goes to their control room as well as to your phone, and the operator follows your response plan. See alarm monitoring.

Most homes are a couple of hours' work. We test that every alarm sets off the others before we leave.

Which alarm goes where

Smoke, heat or carbon monoxide?

Fire and Emergency NZ recommends a smoke alarm in every bedroom, hallway and living area. Heat alarms cover the rooms where a smoke alarm would keep going off.

Smoke + heat

Bedrooms

One in every bedroom. A closed door holds back smoke, and it holds back the sound of an alarm in the hall.

Smoke + heat

Hallways & landings

Between the bedrooms and the way out, and at the top of every stair.

Smoke + heat

Living areas

The lounge, family room and any room people sometimes fall asleep in.

Heat

Kitchen

Cooking sets off smoke alarms. A heat alarm still catches a real fire, without the false alarms every time the toast burns.

Heat

Garage & laundry

Dust, exhaust and dryer lint upset smoke sensors. A heat alarm suits them better.

Smoke + heat + CO

Wood burner & gas heater

The smoke, heat and carbon monoxide version, for rooms with a fire, a gas heater or an attached garage.

Cost

What interconnected alarms cost

Typical prices for Auckland homes, supplied and installed, including the $45 + GST travel charge.

Add one alarm

$320–$400 + GST

$368–$460 incl. GST

To an Ajax alarm you already have. Fitted, paired, tested and travel. The top of the range is the smoke, heat and CO version.

Each extra alarm

$230–$310 + GST

$265–$357 incl. GST

On the same visit. Heat-only alarms for kitchens and garages are a little less.

Three-bedroom home

$1,430–$1,520 + GST

$1,645–$1,748 incl. GST

Ajax alarm already in: smoke alarms in three bedrooms, the hallway and lounge, plus a heat alarm in the kitchen. Top of range adds CO by the fire.

Larger or two-storey

$2,320–$2,400 + GST

$2,668–$2,760 incl. GST

Four bedrooms, a landing, two living areas, plus heat alarms in the kitchen and garage.

No Ajax alarm yet

$2,030 + GST

$2,335 incl. GST

An Ajax hub with five smoke alarms and a kitchen heat alarm. Add intruder sensors to the same hub later.

Extras

$70 + GST

$81 incl. GST · Hush button, silences a false alarm from the wall

$240 + GST

$276 incl. GST · Manual call point, for a shed or workshop

Added on the same visit as other alarms.

Included: Ajax FireProtect 2 alarms with sealed 10-year batteries, mounting, pairing to your hub, a firmware update, testing every alarm against every other one, and an app walkthrough before we leave.

Quoted separately: mains-powered alarms, high or difficult ceilings, and alarm monitoring. You get a fixed, itemised quote first.

New builds & renovations

What the Building Code now requires

Since November 2024, new homes and major renovations that need a building consent must have interconnected smoke alarms. The standard behind it, NZS 4514:2021, allows battery or mains-powered alarms, linked by wire or wirelessly.

Most existing homes are not required to have them. They are still the single biggest upgrade you can make to the smoke alarms in a house, because the alarm that goes off first is rarely the one next to you.

Building or renovating? Ajax makes mains-powered versions of these alarms too, and we are an electrical company, so they go in with the rest of the wiring. For consented work we confirm the alarm system with your designer before anything is fitted. See new build security.

Landlords

Smoke alarms in rentals

The FireProtect 2 alarms we fit are photoelectric with a sealed long-life battery, which is the type the tenancy rules ask for when alarms are installed or replaced. With Ajax, a landlord also hears about it if an alarm goes off, is tampered with or runs low.

Just need standard alarms in a rental? Our electrical side does that as part of a healthy homes compliance check.

Sheds, workshops & small offices

Early warning beyond the house

Sheds, workshops, garages, sleepouts and small offices often have nothing at all. Ajax heat and smoke alarms on your existing hub cover them, and a manual call point by the door lets anyone raise the alarm in the house from out there.

To be clear about what this is: extra early warning. Buildings that are required to have a fire alarm system need one designed, installed and signed off under NZS 4512 by specialist fire contractors. We do not install those, and Ajax does not replace one.

What happens next

How we fit them

1

We Look First

Where people sleep, where the fires and heaters are, the garage and the way out. Then we plan which alarm goes where.

2

Fixed Quote

Every alarm listed by room and type, with the price, before anything is fitted.

3

Fit & Test

Mounted, paired and tested. We set off each alarm and check every other one sounds.

4

Handover

The app, the hush button, what each sound means, and what to do when one goes off.

Where we work: All of Auckland from our Whenuapai base: West Auckland, the North Shore, Central, East and South Auckland, plus the rural north-west, Kumeu, Huapai, Riverhead and Dairy Flat.

Questions we get asked

Common questions

New homes and major consented renovations have needed them since November 2024. Most existing homes do not have to, but they are worth it: an alarm behind a closed door is easy to sleep through.

Yes. They pair with the Ajax hub you already have and show up in the same app. Most homes take a couple of hours, and your intruder alarm carries on as before.

Yes. Ajax fire alarms are always on, armed or disarmed, day and night.

Each alarm still sounds its own 85 dB siren. With the hub, every alarm sounds within about 20 seconds. Without it, the alarms set each other off directly within about 60 seconds.

The FireProtect 2 alarms we fit have sealed batteries rated for up to 10 years. There are no batteries to change, and the app warns you when one needs attention.

Smoke alarms for bedrooms, hallways and living areas. Heat alarms where cooking or dust would set off a smoke alarm, like the kitchen and garage. Add CO near a wood burner, gas heater or attached garage.

They are photoelectric with a sealed long-life battery, the type the tenancy rules ask for. With Ajax, the landlord also hears about it if one goes off or runs low.

Yes. If your Ajax alarm is monitored by Alarm Watch, fire alarms go to their control room as well as your phone, and the operator follows your response plan.

No. A building that must have a fire alarm system needs one installed and signed off under NZS 4512 by fire specialists. We fit Ajax as extra early warning where none is required.

A typical three-bedroom home with an Ajax alarm already in is $1,430-$1,520 + GST, including travel. One alarm on its own is about $320 + GST. You get a fixed quote first.

Every Room, One Alarm

Tell us about your house and whether you already have Ajax. We will plan which alarm goes where and give you a fixed price before anything is fitted.

Get a Free Quote
or call 022 538 3587